Classicyams Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Go to bottom Post Reply Favoured: 0
TOPIC: Re:YDS3
#96
yamaco charlie ()
User Offline Click here to see the profile of this user
yamaco
YDS3 4 Months ago  
Hi Ludy,

The pictures of the YDS3 are very interesting because the YDS3 is identical to the TD1B!

At picture 14 I see the clamps for the clutch and brake levelers. Are these clamps egal to the clamps at the TD racers?

Charles
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#97
Ludy ()
User Offline Click here to see the profile of this user
Re:YDS3 4 Months ago  
Hello Charles-San!
The brackets for the TD1 models had number 145-82811/821-00. They have a small screw that holds the blade spring for the knurled wire adjusters.
The brackets for the YDS3 had bowdencables with normal adjusting screws, so these had no screw hole.
So they are nearly the same. These early racing ones were re-used for the TD2/TR3.
Ludy Beumer
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
#98
yamaco charlie ()
User Offline Click here to see the profile of this user
yamaco
Re:YDS3 4 Months ago  
Thanks for the info Ludy-San

Charles
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
Go to top Post Reply
Powered by FireBoard
 
All Articles
Links
Contact Us
Forum
Guestbook
Newsletter
    DESIGN: REMKO VISSER